LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (7.5L V8 - VIN [G]) >> Lubrication >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. To reassemble, reverse disassembly procedure. Ensure components are installed in original location. Ensure oil pump spins freely after reassembly. To install, prime oil pump by filling inlet opening with oil and rotating pump shaft until oil emerges from outlet opening.
  2. Install oil pump assembly and pan. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS.
scientia non olet · About LEMON Manuals