Cylinder Block Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

4.3600-4.3636 (110.744-110.835)

Maximum Out-Of-Round

Standard

.0015 (.038)

Service Limit

.005 (.13)

Maximum Taper

.010 (.25)

Maximum Deck Warpage ⁽¹⁾

.003 (.08)

⁽¹⁾	Specification is within any 6" (152 mm) area. Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.