Removal (Bronco & Pickup)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
- Remove fan shroud. Remove upper intake manifold. Refer to UPPER INTAKE MANIFOLD . On A/T models, disconnect oil cooler lines from radiator. On all models, disconnect exhaust pipes from exhaust manifold. Remove front engine mounting nuts, and raise engine.
- Drain engine oil. Support transmission and remove transmission crossmember. Remove oil pan bolts and lower oil pan. Remove oil pump bolts and pick-up tube nut. Lower oil pump assembly into pan. Remove oil pan from vehicle.