Oil Pan: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Apply silicone sealant at front and rear corners of oil pan surface and cylinder block, and where timing chain cover meets cylinder block. To install remaining components, reverse removal procedure.
- Apply silicone sealant at front and rear corners of oil pan surface and cylinder block, and where timing chain cover meets cylinder block. Position NEW gasket and seals to engine block.
- Position oil pan with pump to engine, and install oil pump. To complete installation, reverse removal procedure. Fill or top off all fluids. Fill and bleed air from cooling system. Refer to COOLING SYSTEM BLEEDING .