Crankshaft Rear Oil Seal: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
Coat seal surfaces with light engine oil. DO NOT use grease for seal lubrication. Using Seal Installer (T82L-6701-A), install seal until firmly seated. To install remaining components, reverse removal procedure.