Crankshaft Front Seal: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
Coat NEW seal with grease. Using Seal Installer (T88T-6701-A), install NEW timing chain cover seal. Ensure seal is fully seated and spring is properly positioned in seal. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .