Removal & Disassembly
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
- Remove oil pan. See OIL PAN under REMOVAL & INSTALLATION. Remove oil pump from oil pan. Remove oil pump drive shaft. Disassemble oil pump.
- Note direction of component installation for reassembly reference. Drill a small hole in oil pressure relief valve cap. Install self-threading screw in drilled hole and pull on screw to remove cap.