Removal & Installation: Thermostat: Removal
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the radiator so that the coolant level is below the water thermostat.
- Disconnect the bypass hoses at the water pump (8501) and intake manifold (9424).
- Remove the bypass tube.
- Remove the water outlet housing attaching bolts.
- Bend the upper radiator hose (8260) upward and remove the water thermostat and water hose connection gasket (8255).