Removal & Installation: Engine: Installation
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Check and top off all engine fluids. Fill and bleed air from cooling system. See, in this article, COOLING SYSTEM BLEEDING .
WARNING:
Disable air bag system before removing or disconnecting components. To disable air bag system, see AIR BAG RESTRAINT article in ACCESSORIES & EQUIPMENT.
To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Check and top off all engine fluids. Fill and bleed air from cooling system. See, in this article, COOLING SYSTEM BLEEDING .