LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5.0L V8 - VIN [N]) >> Removal & Installation >> Crankshaft Rear Oil Seal >> Installation

Crankshaft Rear Oil Seal: Installation

WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

Coat seal surfaces with light engine oil. DO NOT use grease for seal lubrication. Using Seal Installer (T82L-6701-A), install seal until firmly seated. To install remaining components, reverse removal procedure.

scientia non olet · About LEMON Manuals