LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (5.0L V8 - VIN [N]) >> Removal & Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

Coat NEW seal with grease. Using Seal Installer (T88T-6701-A), install NEW timing chain cover seal. Ensure seal is fully seated and spring is properly positioned in seal. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals