Pistons Pins & Rings Specifications
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS PINS & RINGS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Piston | ||||||
| Clearance | .0014-.0022 (.036-.056) | |||||
| Diameter (1) | ||||||
| Red | 3.9989-3.9995 (101.572-101.587) | |||||
| Blue | 4.0001-4.0007 (101.603-101.618) | |||||
| Yellow | 4.0013-4.0019 (101.633-101.648) | |||||
| Pins | ||||||
| Diameter | .9119-.9124 (23.16-23.17) | |||||
| Length | 3.01-3.04 (76.45-77.21) | |||||
| Piston Fit | .0002-.0004 (.005-.010) | |||||
| Rod Fit | Press Fit | |||||
| Rings | ||||||
| End Gap | ||||||
| No. 1 | .010-.020 (.25-.51) | |||||
| No. 2 | .018-.028 (.46-.71) | |||||
| Side Clearance | .0013-.0033 (.033-.084) | |||||
| No. 3 (Oil) | ||||||
| End Gap (Steel Rail) | .010-.040 (.25-1.01) | |||||
| Side Clearance | Snug Fit | |||||
|
||||||