Cylinder Head Specifications

WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD

Application

In. (mm)

Maximum Warpage ⁽¹⁾

.003 (.08)

Valve Seats

Seat Angle

45°

Seat Width

.060-.080 (1.5-2.0)

Maximum Seat Runout

.002 (.05)

Valve Guides

Intake Valve

Valve Guide Bore I.D.

.3433-.3443 (8.720-8.745)

Valve Stem-To-Guide Oil Clearance

.0010-.0027 (.025-.069)

Exhaust Valve

Valve Guide Bore I.D.

.3433-.3443 (8.720-8.745)

Valve Stem-To-Guide Oil Clearance

.0015-.0032 (.038-.081)

⁽¹⁾	Specification listed is within 6" (152 mm). Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.