Cylinder Block Specifications

WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

4.0004-4.0052 (101.61-101.73)

Maximum Taper

.010 (.25)

Maximum Out-Of-Round

Standard

.0015 (.038)

Service Limit

.005 (.13)

Maximum Deck Warpage ⁽¹⁾

.003 (.08)

⁽¹⁾	Specification is within a 6" (152 mm) area. Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.