Camshaft Specifications
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Club Wagon, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT
| Application | In. (mm) | |
|---|---|---|
| Bearing I.D. Diameter | ||
| No. 1 | 2.0835 (52.921) | |
| No. 2 | 2.0685 (52.540) | |
| No. 3 | 2.0535 (52.159) | |
| No. 4 | 2.0385 (51.778) | |
| No. 5 | 2.0235 (51.397) | |
| End Play | .001-.007 (.03-.18) | |
| Journal Diameter | ||
| No. 1 | 2.0815 (52.870) | |
| No. 2 | 2.0665 (52.489) | |
| No. 3 | 2.0515 (52.108) | |
| No. 4 | 2.0365 (51.727) | |
| No. 5 | 2.0215 (51.346) | |
| Journal Runout | .005 (.13) | |
| Lobe Lift | ||
| Intake | .278 (7.06) | |
| Exhaust | .283 (7.19) | |
| Lobe Wear Limit | .005 (.13) | |
| Oil Clearance | .001-.003 (.03-.08) | |
| Timing Chain Deflection | .500 (12.70) | |