LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine - 4.9L 6-CYL - VIN [Y]) >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Drain cooling system. Remove accessory drive belt by using a 3/8" (10 mm) open-end wrench. Lift belt tensioner away from belt. Using Fan Clutch Pulley Holder (T84T-6312-C) and Fan Clutch Nut Wrench (T93T-6312-B), remove fan and clutch assembly. Remove water pump pulley. Disconnect coolant hoses from water pump. Remove water pump.