Removal & Installation: Thermostat: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the radiator (8005) so that the coolant level is below the water thermostat.
- Remove the coolant outlet elbow attaching bolts.
- Pull the elbow away from the cylinder head (6049) sufficiently to provide access to the water thermostat.
- Remove the water thermostat and gasket.