LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine - 4.9L 6-CYL - VIN [Y]) >> Removal & Installation >> Oil Pan >> Removal (Pickup)

Removal (Pickup)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain engine oil and cooling system. Disconnect negative battery cable. Raise and support vehicle. Remove starter. Remove both front engine mount-to-engine mount bracket nuts.
  2. Raise engine and place 1" (25.4 mm) wood blocks between front engine mount insulators and frame brackets. Remove oil pan bolts. Lower pan and remove oil pump bolts and pick-up tube nut. Lower oil pump assembly into pan. Remove pan.
scientia non olet · About LEMON Manuals