Camshaft Bearings: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
To install cam bearings, reverse removal procedure. Ensure oil holes in bearings align with oil holes in cylinder block when installing camshaft bearings. Install front bearing so .020-.035" (.51-.89 mm) exists between front edge of bearing and face of cylinder block.