Pistons Piston Pins & Piston Rings Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS PINS & RINGS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Piston | ||||||
| Clearance | .0010-.0018 (.025-.046) | |||||
| Diameter (1) | ||||||
| Red Piston | 3.9982-3.9988 (101.554-101.570) | |||||
| Blue Piston | 3.9994-4.0000 (101.585-101.600) | |||||
| Yellow Piston | 4.0008-4.0014 (101.620-101.636) | |||||
| Pins | ||||||
| Diameter | ||||||
| Standard | .9749-.9754 (24.762-24.775) | |||||
| .001" (.03 mm) Oversize | .9760-.9763 (24.790-24.798) | |||||
| .002" (.05 mm) Oversize | .9770-.9773 (24.816-24.823) | |||||
| Piston Fit | ||||||
| Under 8500 Lbs. GVW | .00029-.0005 (.007-.013) | |||||
| Over 8500 Lbs. GVW | .0003-.0005 (.008-.013) | |||||
| Rings | ||||||
| No. 1 | ||||||
| End Gap | .010-.020 (.25-.51) | |||||
| Side Clearance | ||||||
| Standard | .0019-.0036 (.048-.091) | |||||
| Wear Limit | .0056 (.142) | |||||
| No. 2 | ||||||
| End Gap | .010-.020 (.25-.51) | |||||
| Side Clearance | ||||||
| Standard | .002-.004 (.05-.10) | |||||
| Wear Limit | .006 (.15) | |||||
| No. 3 (Oil) | ||||||
| End Gap (Steel Rail) | .010-.035 (.25-.89) | |||||
| Side Clearance | Snug Fit | |||||
|
||||||