Cylinder Block Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

4.0000-4.0048 (101.600-101.722)

Maximum Taper

.010 (.25)

Maximum Out-Of-Round

.0015 (.038)

Main Bearing Bore Diameter

2.5902-2.5910 (65.791-65.811)

Maximum Deck Warpage

⁽¹⁾

⁽¹⁾	No more than .003" (.08 mm) within a 6" (152 mm) area, and no more than .006" (.15 mm) overall. DO NOT remove more than .010" (.25 mm) material from original deck if machining is required.