Connecting Rods Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CONNECTING RODS

Application

In. (mm)

Bore Diameter

Pin Bore

.9734-.9742 (24.724-24.745)

Crankpin Bore

2.2750-2.2758 (57.785-57.805)

Crankpin Bearing Bore Out-Of-Round

.0006 (.015)

Center-To-Center Length

6.2082-6.2112 (157.688-157.764)

Maximum Bend ⁽¹⁾

.012 (.30)

Maximum Twist ⁽¹⁾

.024 (.61)

Side Play

Standard

.006-.013 (.15-.33)

Wear Limit

.018 (.46)

⁽¹⁾	Specification listed is measured at the ends of an 8" (203 mm) bar, 4" (102 mm) on each side of rod center line.