Camshaft Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CAMSHAFT

Application

In. (mm)

Journal Diameter

2.017-2.018 (51.23-51.26)

Bearing I.D.

2.019-2.020 (51.28-51.31)

End Play

Standard

.001-.007 (.03-.18)

Wear Limit

.009 (.23)

Journal Runout (Maximum TIR)

.008 (.20)

Lobe Lift

⁽¹⁾ .249 (6.32)

Maximum Lobe Wear

.005 (.13)

Journal-To-Bearing Oil Clearance

Standard

.001-.003 (.03-.08)

Wear Limit

.006 (.15)

⁽¹⁾	Lobe lift is .247" (6.27 mm) on F150 (Federal emissions) with 2.47:1 or 2.75:1 axle ratio and manual transmission.