Cylinder Head Specifications

WARNING: This page is about a different car, the 1995 Ford Ranger and 1995 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD

Application

In. (mm)

Maximum Warpage ⁽¹⁾

.003 (.08)

Valve Seats

Seat Angle

45°

Seat Width

.060-.079 (1.52-2.00)

Maximum Seat Runout

.0015 (.038)

Valve Guides

Valve Guide Bore I.D.

.3174-.3184 (8.062-8.087)

Valve Stem-To-Guide Oil Clearance

Intake

.0008-.0025 (.020-.064)

Exhaust

.0018-.0035 (.046-.089)

⁽¹⁾	Specification listed is within 6" (152 mm). Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.