Cylinder Block Specifications
WARNING: This page is about a different car, the 1995 Ford Ranger and 1995 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application |
In. (mm) |
| Cylinder Bore |
| Standard Diameter |
3.9527-3.9543 (100.398-100.439) |
| Maximum Taper |
.010 (.25) |
| Maximum Out-Of-Round |
| Standard |
.0015 (.038) |
| Service Limit |
.005 (.13) |
| Maximum Deck Warpage |
|