Connecting Rods Specifications

WARNING: This page is about a different car, the 1995 Ford Ranger and 1995 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

CONNECTING RODS

Application

In. (mm)

Bore Diameter

Pin Bore

.9432-.9439 (23.957-23.975)

Crankpin Bore

2.2370-2.2378 (56.820-56.840)

Center-To-Center Length

5.1386-5.1413 (130.520-130.589)

Maximum Bend ⁽¹⁾

.002 (.05)

Maximum Twist ⁽¹⁾

.006 (.15)

Side Play

Standard

.0002-.0025 (.005-.063)

Service Limit

.014 (.36)

⁽¹⁾	Specification listed is measured at the ends of an 8" (203 mm) bar, 4" (102 mm) on each side of rod center line.