Camshaft Specifications
WARNING: This page is about a different car, the 1995 Ford Ranger and 1995 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT
| Application | In. (mm) | |
|---|---|---|
| Camshaft Bearing I.D. | ||
| No. 1 | 1.954-1.955 (49.64-49.66) | |
| No. 2 | 1.939-1.940 (49.26-49.28) | |
| No. 3 | 1.919-1.920 (48.75-48.77) | |
| No. 4 | 1.924-1.925 (48.88-48.90) | |
| End Play | ||
| Standard | .025-.064 (.065-.165) | |
| Service Limit | .009 (.23) | |
| Journal Runout | .005 (.13) | |
| Lobe Lift Wear Limit | .005 (.13) | |
| Oil Clearance | ||
| Standard | .0010-.0026 (.025-.066) | |
| Service Limit | .006 (.15) | |
| Valve Lift | .4024 (10.220) | |