Removal (Upper)
WARNING: This page is about a different car, the 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
- Remove negative battery cable. Remove air cleaner intake duct from throttle body. Remove splash shield to expose throttle linkage. Remove throttle cable and bracket from throttle body.
- Disconnect all vacuum hoses. Disconnect all electrical connectors. Relieve fuel pressure. See FUEL PRESSURE RELEASE . Using Fuel Line Coupling Key (T90P-9550-A), disconnect fuel supply and return lines at fuel supply manifold. See Figure. Remove ignition coil. Remove upper intake manifold bolts. Remove upper intake manifold and throttle body as an assembly.