Crankshaft Main & Connecting Rod Bearings Specifications
WARNING: This page is about a different car, the 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT MAIN & CONNECTING ROD BEARINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Crankshaft | |||||
| End Play | |||||
| Standard | .0020-.0125 (.05-.32) | ||||
| Service Limit | .0125 (.32) | ||||
| Main Bearings | |||||
| Journal Diameter | 2.2433-2.2441 (56.980-57.000) | ||||
| Journal Out-Of-Round | .0006 (.015) | ||||
| Journal Taper | (1) .0006 (.015) | ||||
| Journal Runout (Max.) | .002 (.05) | ||||
| Oil Clearance | |||||
| Desired | .0008-.0015 (.020-.038) | ||||
| Allowable | .0005-.0019 (.013-.048) | ||||
| Connecting Rod Bearings | |||||
| Journal Diameter | 2.1252-2.1260 (53.980-54.000) | ||||
| Journal Out-Of-Round | .0006 (.015) | ||||
| Journal Taper | (1) .0006 (.015) | ||||
| Oil Clearance | |||||
| Desired | .0003-.0024 (.008-.061) | ||||
| Allowable | .0005-.0022 (.013-.056) | ||||
|
|||||