New Generation Star (NGS) Tool
WARNING: This page is about a different car, the 1996 Mazda B4000, 1996 Mazda B3000, and 1996 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Insert vehicle interface module and program card into NGS tool control unit. See Fig 1 . Connect NSG tool adapter cable leads to tool and data link connector 2 located under left side of dash. See Figure . Plug NSG tool power cable into cigarette lighter or use battery hookup adapter. Listen for a double beep sound. NSG tool is now intialized. Proceed to KOEO SELF-TEST .