Removal (B2300, B3000 & B4000)
WARNING: This page is about a different car, the 1995 Mazda B4000, 1995 Mazda B3000, and 1995 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect throttle position sensor electrical connector. Remove snow/ice shield (if equipped) to expose throttle linkage. Remove throttle cable bracket.
- Disconnect cable from ball stud on throttle body. Remove air cleaner-to-throttle body air inlet tube. Disconnect canister purge hose from fitting beneath throttle body.
- On B2300 with M/T, remove EGR valve. On B4000, remove bolts holding upper intake manifold. Remove throttle body and upper intake manifold assembly. Remove 4 throttle body bolts. Remove throttle body from upper intake manifold.