LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN [U] >> Removal & Installation >> Valve Cover >> Installation (All Models)

Installation (All Models)

  1. If replacing gasket, note position of studs and bolts before removing. Replace valve cover gasket if necessary. Ensure gasket lies flat in valve cover channel. Lightly oil threads of bolts and studs. Ensure sealing surfaces are clean.
  2. Apply a bead of silicone sealant to intake manifold-to-cylinder head joining area. Install valve cover and tighten bolts to specification. See TORQUE SPECIFICATIONS  table. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals