LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN [U] >> Removal & Installation >> Timing Chain & Sprockets >> Installation

Timing Chain & Sprockets: Installation

  1. Ensure No. 1 piston is still at TDC of compression stroke. Assemble timing chain and sprockets so sprocket timing marks are aligned. See Fig 1. Install chain and sprockets as an assembly. Lubricate timing chain and sprockets with engine oil.
  2. Apply RTV sealer to damper keyway. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS  table.
Fig 1: Aligning Sprocket Timing Marks
G95G26985Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals