LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft >> Overhaul >> Double CARDAN Universal Joints >> Installation (1-Piece Shaft Front)

Installation (1-Piece Shaft Front)

  1. Clean yoke. Inspect machined surface for scratches, nicks, or burrs. Check for arrows on slip joint and drive shaft to aid in alignment.
  2. Connect single end of drive shaft to front axle. Install "U" bolts and tighten nuts. Connect double Cardan joint end to transfer case. Install "U" bolts.