LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle - 8.8" Ring Gear Differentials >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
ABS Sensor Bolt 25-30 (34-41)
Axle Shaft Bolt (Full-Floating) 60-80 (81-108)
Backing Plate Retainer Nut 20-40 (27-54)
Bearing Cap Bolt
8.8" & 9.75" Ring Gear 70-85 (95-115)
10.25" Ring Gear 80-95 (108-129)
Brake Junction Block Bolt 25-30 (34-41)
Coil Spring Retainer Nut
Lower 41-64 (56-87)
Upper 30-40 (41-54)
Driveshaft-To-Circular Companion Flange Bolt 70-95 (95-129)
Driveshaft-To-Half Round Companion Flange Bolt 10-15 (14-21)
Housing Cover Bolt
8.8" Ring Gear 15-20 (21-27)
9.75" & 10.25" Ring Gear 28-38 (38-52)
Hub Nut (Full-Floating) (1) 55-65 (75-88)
Lower Control Arm-To-Axle Housing Bolt 100-129 (136-175)
Pinion Nut (Minimum) (2) 160 (217)
Pinion Shaft Lock Bolt 15-30 (21-41)
Ring Gear Bolt
8.8" Ring Gear 70-85 (95-115)
9.75" & 10.25" Ring Gear 100-120 (136-163)
Shock Absorber Nut
Lower & Upper 45-60 (61-81)
Stabilizer Bar Nut 30-42 (41-57)
Wheel Lug Nut 85-115 (115-156)
(1) Ratchet back 5 clicks (new bearings) or 8 clicks (used bearings) after initial torque.
(2) If bearing preload exceeds specification before torque specification is reached, install NEW  collapsible spacer.