Differential Specifications
DIFFERENTIAL ASSEMBLY SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Differential Case Maximum Runout | .003" (.08 mm) | |||
| Ring Gear Backlash | (1) .008-.015" (.20-.38 mm) | |||
| Ring Gear Maximum Runout | .004" (.10 mm) | |||
| INCH Lbs. (N.m) | ||||
| Pinion Bearing Preload | ||||
| New Bearings | 16-28 (1.8-3.2) | |||
| Used Bearings | 8-14 (.9-1.6) | |||
|
||||