LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel >> Installation

Steering Wheel: Installation

  1. Ensure front wheels are straight ahead. Route contact assembly wire harness through steering wheel at 3 o'clock position. Position steering wheel onto shaft, ensuring marks are aligned. Ensure air bag wiring is not pinched.
  2. Install NEW steering wheel bolt/nut and tighten to specification. See TORQUE SPECIFICATIONS . Connect speed control wiring (if equipped). Ensure wiring is not trapped between steering wheel and contact assembly. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals