LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Overhaul - 4R44E & 4R55E Automatic Transmission >> Component Disassembly & Reassembly >> Direct Clutch >> Disassembly

Direct Clutch: Disassembly

  1. Remove pressure plate retaining snap ring. Remove pressure plate and clutch pack. Using appropriate spring compressor, compress clutch springs and remove retaining ring. Carefully release pressure on springs.
  2. Remove spring compressor, spring retainer and clutch springs. Turn clutch body over and carefully force piston out with compressed air. DO NOT  exceed 20 psi (1.4 kg/cm2 ). Hold finger over opposite hole. Remove "O" rings from piston and clutch body. See related components under CLEANING & INSPECTION  .