Disabling & Activating Air Bag System: Disabling
- Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition switch to LOCK position.
- Remove AIRBAG fuse from I/P fuse block. Remove CPA clip and disconnect Yellow 2-way SIR connector at base of steering column (it may be necessary to remove left sound insulator). Disconnect Yellow SIR connector under right instrument panel or behind glove box door assembly.
- Wait 2 minutes before beginning service. All connectors in SIR system use CPA clips to ensure connector retention. Even if system is disconnected, use caution when working near air bags.