LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Probe Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Pinpoint Tests >> Pinpoint Test K - Oil Pressure Gauge Inaccurate

Pinpoint Test K - Oil Pressure Gauge Inaccurate

  1. Perform OIL PRESSURE SENDING UNIT TEST under TESTING. If sending unit is okay, go to next step. Replace sending unit if it fails test.
  2. Perform OIL PRESSURE GAUGE TEST under TESTING. If oil pressure gauge is okay, go to next step. Replace oil pressure gauge if it fails test.
  3. Turn ignition off. Unplug 16-pin connector from instrument cluster. Measure resistance between Purple/Yellow harness connector pin No. 6 and sending unit harness connector. If resistance is less than 5 ohms, replace instrument cluster printed circuit. If resistance is not less than 5 ohms, repair Purple/Yellow wire between instrument cluster and sending unit.
scientia non olet · About LEMON Manuals