LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Escort GT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder >> Disassembly (Non-ABS)

Disassembly (Non-ABS)

  1. Remove master cylinder. Clean outside of master cylinder. Remove fluid reservoir cap. Drain brake fluid from master cylinder.
  2. Clamp master cylinder in vise at mounting flange. Remove reservoir screw. Remove plastic reservoir and seals. See Fig 1 .
  3. Press primary piston inward, and remove piston stop bolt (if equipped). Remove snap ring. Remove primary and secondary piston assemblies. If secondary piston is difficult to remove, apply compressed air to secondary outlet port to aid in piston removal.
Fig 1: Exploded View Of Non-ABS Master Cylinder
G95C13047Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals