Mechanical - Hydraulic: Drum: Remove & Replace
WARNING: This page is about the Taurus GL, 4D Sedan, 3.0 1, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Rear,Both | 0.5 | B | ||
| Rear,One Side | 0.3 | B | ||
| Combination Procedure: DRUM (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.2 | B | ||
| One | 0.3 | B | ||