LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Probe SE, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

  1. Disconnect negative battery cable. Disconnect brake fluid level indicator connector. Disconnect hydraulic brake lines from master cylinder. Remove master cylinder nuts and master cylinder. Disconnect manifold vacuum hose from brake booster.
  2. From under dash, remove brake pedal clevis pin. Remove brake pedal push rod from brake pedal. Remove booster-to-dash panel nuts. Remove brake booster and gasket.
scientia non olet · About LEMON Manuals