LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Probe SE, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder >> Disassembly (Non-ABS)

Disassembly (Non-ABS)

  1. Remove master cylinder. Clean outside of master cylinder. Remove fluid reservoir cap. Drain brake fluid from master cylinder.
  2. Clamp master cylinder in vise at mounting flange. On Escort and Tracer, remove reservoir screw. On all models, remove plastic reservoir and seals. See Fig 1 .
  3. Press primary piston inward and remove piston stop bolt (if equipped) . Remove snap ring. Remove primary and secondary piston assemblies. If secondary piston is difficult to remove, apply compressed air to secondary outlet port to aid in piston removal.
Fig 1: Exploded View Of Non-ABS Master Cylinder
G00027305Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals