Clutch Master Cylinder: Remove & Replace
WARNING: This page is about the Ranger Base, 2D Pickup, 2.3 A, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| External Mounted Slave | NOTE: Unitized Reservoir, Master Cylinder and Slave Cylinder. | 0.9 | 0.6 | C |
| Internal Mounted Slave | NOTE: One piece Reservoir and Master Cylinder. Separate Slave Cylinder. | 1.0 | 0.5 | C |
| Combination Procedure: CLUTCH MASTER CYLINDER: Overhaul: | ||||
| 0.5 | B | |||