LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Steering >> Steering Columns >> Removal & Installation >> Steering Wheel & Horn Pad >> Removal (Continental, Crown Victoria, Grand Marquis, Mark VII, Sable, Taurus, Town Car & Mark VIII)

Removal (Continental, Crown Victoria, Grand Marquis, Mark VII, Sable, Taurus, Town Car & Mark VIII)

  1. Ensure front wheels are in straight-ahead position and steering shaft alignment mark is at 12 o'clock position. Disconnect battery ground cable. Disable air bag system.
  2. Remove air bag module retaining nuts from steering wheel. See Figure and Figure . Lift air bag module from steering wheel and disconnect clockspring electrical connector from module.
  3. Disconnect cruise control switch electrical connector from contact assembly electrical connector. Remove steering wheel bolt.
  4. Using Steering Wheel Puller (T67L-3600-A), remove steering wheel. As wheel is removed, route contact assembly and cruise control/horn wiring harnesses through steering wheel.
scientia non olet · About LEMON Manuals