LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Steering >> Steering Columns >> Removal & Installation >> Contact Assembly (CLOCKSPRING) R & I >> Removal (Continental, Crown Victoria, Grand Marquis, Mark VII, Mustang, Sable, Taurus, Town Car & Mark VIII)

Removal (Continental, Crown Victoria, Grand Marquis, Mark VII, Mustang, Sable, Taurus, Town Car & Mark VIII)

  1. Disconnect battery ground cable and disable air bag system. Ensure steering wheel is in straight ahead position. Mark steering shaft at 12-o'clock position for installation reference. Remove steering wheel. See STEERING WHEEL & HORN PAD  .
  2. Remove lower moldings from instrument panel by unsnapping from retainer. Remove lower trim panel from instrument panel. Remove lower shroud. See Figure , Figure and Figure . Disconnect clockspring electrical connector from column harness.
  3. If contact assembly is to be re-used, tape contact assembly to prevent rotation of contact and internal damage to clockspring. See Figure . Remove contact assembly.
scientia non olet · About LEMON Manuals