LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe LX, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Temperature Gauge Continuity Check No. 1

Temperature Gauge Continuity Check No. 1

  1. Ground Yellow/Green wire at resistor, located under center of dash. Set ignition switch to RUN position.
  2. Observe temperature gauge. If temperature gauge indicates cold, repair Yellow/Green wire between gauge and resistor.
  3. If temperature gauge does not indicate cold, go to RESISTOR CHECK.
scientia non olet · About LEMON Manuals