LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe LX, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Seat Belt Warning Light Short Check No. 2

Seat Belt Warning Light Short Check No. 2

  1. Connect jumper wire between Brown/Black and Brown/White wires at CPU 14-pin connector. See IDENTIFYING WARNING LIGHT CIRCUIT illustration. Ensure driver lap belt is unbuckled.
  2. If SEAT BELT warning light goes off, replace CPU. If SEAT BELT warning light does not go off, go to SEAT BELT WARNING LIGHT SWITCH CHECK.
scientia non olet · About LEMON Manuals