LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe LX, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Instrument Panel Supply Check

Instrument Panel Supply Check

  1. Set ignition switch to RUN position. Measure voltage on Black/Yellow wire at instrument panel 18-pin connector. Instrument panel 18-pin connector is located on right side of cluster, near steering column.
  2. If voltage is 11-13 volts, go to INSTRUMENT GROUND CONTINUITY CHECK. If voltage is not 11-13 volts, repair Black/Yellow wire between gauges and fuse panel.
scientia non olet · About LEMON Manuals